Top 17 Best 3D Printer Build Plates in 2022

Finding the right 3d printer build plate has become a challenging task because there are so many choices out there. This is why we’ve compiled a list of the best 3d printer build plate so that you can compare them and choose the right one for your needs.

All the 3d printer build plate featured on this page are independently chosen. When you make any purchase through links on this site, we may earn a small affiliate commission at no extra cost to you.

Followings are the best-selling 3d printer build plate on Amazon:

Last update on 2022-10-05 / Affiliate links / Images from Amazon Product Advertising API

While checking out the 3d printer build plate, you may also be interested in our collection of the best 3d printer controller boards.

Best 3D Printer Build Plates

In the following section, we’ve compiled the most popular 3d printer build plate available today. To make your choice easier, we’ve listed some of the key features of each of these 3d printer build plate.

Sale1
Highlighted Features:
  • ATTENTION BEFORE USE:Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
2
Highlighted Features:
  • EASY TO REMOVE THE PRINTS: The preferred choice for 3D printer heated beds, just print on the magnetic construction board, remove the upper magnetic surface, carefully bend it, and watch the model fall into your hands. VS. tempered glass, it adheres better and is easier to fix, no more worrying about being broken. VS. carbon-silicon glass, it is more affordable and easier to remove the model.
  • EXCELLENT PERFORMANCE: The magnetic bed is highly flexible and heat resistant, up to 70°C without demagnetization. The heating speed is fast and uniform, ensuring that the bottom of the finished model is delicate and not warped. It is durable, easy to clean with alcohol and can be used repeatedly.
  • EASY TO INSTALL: The build surface consists of an upper magnetic build surface and a lower magnetic adhesive base. Place the lower 3M adhesive surface on top of the 3D Printer build plate then you can start to print your models.
  • CUSTOMIZABLE: This magnetic bed replacement can be easily cut to any size. Suitable for all FDM printer models, as well as all heated and unheated 3D printer beds. Suitable materials: PLA
  • NOTE: Before installation, please make sure the bottom of the soft magnetic adhesive is firmly attached to the upper layer, if it cannot be attached, please rotate 90 degrees and try again until it is fully attached.Please don't use acetone to wipe the thin layer left by the models.
Sale3
Highlighted Features:
  • Size: Magnetic plate 235mmx235mm/9.2x9.2 inch for Ender 3, Ender 3 Pro, Ender 3 v2, Ender 3 S1, Longer LK4, LK4 Pro, and most other 235mm 3D printers.Note: it is single side, one side is textured.
  • High quality build plate: The custom-designed textured PEI material let’s your prints easily adhere to the flexible print bed.
  • Easy to install: PEI spring steel sheet made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.
  • When printing is complete, let the PEI Sheet cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
  • We have applied PEI sheet on the build plate by machine, so you don't need to worry about the performance. If you receive the package but find the air bubbles or scratches, they are only on the surface and won’t effect printing performance. The PEI is textured, so scratches over time from printing will not show up in your print. The textured surface leaves an eye catching, professional finish to your print.
Sale4
Highlighted Features:
  • Compatibility: Our glass bed is applicable for Creality 3D printer Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro and most of the Cartesian style 3D printer with a MK2 MK3 hot bed. Please confirm the size of your printer's platform firstly.
  • No Edge Curling: The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be sticked on the build surface firmly without glue, avoiding the issue of prints edges curling. Equipped with 4 clips to fix the hot bed.
  • Super Convenient: It is very easy to remove the prints. The surface of our tempered glass bed is a layer of microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.
  • Excellent Flatness: Upgraded ender 3 build plate with smaller CREALITY logo provides flatter and smoother build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of mold during 3D printing.
  • High Grade Material: Made of 100% Genuine Borosilicate Glass, thick and high quality. Glass bed's hardness is up to 8 Mohs and is capable to work up to 400 ℃. Using alcohol or acetone to wipe it after repeated use.
5
Highlighted Features:
  • 🏆【Quality Assurance】100% Official Creality 3D Printer PEI Sheet Removable Magnetic Flexible Heated Bed Platform has three overlaps, heat resistant and durable. The flexible spring steel platform is in the middle, covered with an imported PEI surface on it, which can be resistant to 200°C and has high strength with no deformation. And a magnetic base at the bottom can withstand a long time of work with the 3d printer heated bed at a high temperature of 70°C.
  • ⭕【Wide Application】The PEI sheet can compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm PEI sheet 3d printer bed perfect printing size works well with Ender 3/ Ender 3 S1/ Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. PEI sheets can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
  • ❤【Great Adhesion & Easy Take Mold】Print molds onto PEI sheet surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
  • 👍【Simple Installation】Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
  • 👍【Official Creality 3D Store】More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours no matter what question.
6
Highlighted Features:
  • Size: 158x162mm, 5pcs
  • Brand:Flashforge
  • Long print life per plate sticker. Extend the life of a sticker by wiping with a magic sponge when needed.
  • Original build plate stickers for Flashforge Adventurer 3 3D printer,works with Adventurer 3, Adventurer 3c, Adventurer 3 Lite,Adventurer 3 pro,Compatible with ABS, PLA, HIPS and other filament
  • Durable construction allows for multiple uses with either the same or different filament materials
7
Highlighted Features:
  • Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.
  • High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.
  • 0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.
  • Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
  • High Hardness and Durable: This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness.
Sale8
Highlighted Features:
  • The magnetic plate are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120℃ on the bed.
  • Double-sided PEI: Flexible Printing bed has double-sided PEI coating, both sides can be use,both side is textured.
  • When printing is complete, let the spring steel sheet cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
  • The size of flexible PEI build plate 235*235mm(9.25*9.25inch),PEI sheet is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2,Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro,CR-20, CR-20 Pro and similarly sized machines.
  • Easy to install: Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your printing build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.
9
Highlighted Features:
  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate
  • UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
10
Highlighted Features:
  • Compatible with Ender 3, Ender 3 Pro, Ender 3X, Ender 3 V2, Ender 5 ,Ender 5 Pro ,CR 20 Pro. Aquila X2.
  • Size: 235mm x 235mm.
  • Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming, Magnetic base with strong magnetism
  • Easy to install, easy to remove the models by bending or popping it off
  • No more tape, no more glue, no more shovel, and release your printing anxiety
11
Highlighted Features:
  • Upgrade large hexagon socket screw providing a more stable and longlasting leveling result.
  • Sandblasted surface can achieve higher adhesion during printing
  • Perfect option of fast switching and cleaning for people who need high print efficiency.
  • It comes with an Allen wrench for replacing or fastening the screws of the build plate.
  • Compatible with ELEGOO Mars 3 LCD 3D Printer.
12
Highlighted Features:
  • 💜【Applicable 3d printer model】The size of resin spring steel plate is 192X120mm. Suitable for any resin 3D printer with a printing platform size of 192X120mm, such as: Elegoo Saturn V1, Saturn Voxelab Proxima 8.9" 4K Flashforge Foto 8.9 3D Printer
  • 💜【Easy to use】The traditional DLP light curing printer platform must be removed with tools such as a scraper, while this resin flexible board can be removed by bending. Easier to remove printed models from resin build surfaces and never again scratch or damage your prints or build plates!
  • 💜【Strong adhesion】The surface of the resin steel plate is treated with special wire drawing, which has a stronger adsorption force, so that the model can be better adsorbed
  • 💜【High Durability】The resin steel plate is made of spring steel imported from the United States, with good flatness and durability; the soft magnetic sticker has a strong magnetic force
  • 💜【24 Months Longer Warranty】All components are rigorously tested before shipment. We will provide a long-term warranty service of up to 24 months (normal warranty period is 12 months). We will respond promptly within 12 hours within one working day. Any questions, please feel free to write to us.
13
Highlighted Features:
  • 【Super Convenient】Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • 【Easy Removal】This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible bed and the model fall right into your hands.
  • 【Any size】3D printer bed size is 235*235mm, Also we can cut it workes with other FDM printers
  • 【About Install】Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • 【After installation】Please re-level it after you install it (printing the magnetic mat will increase the thickness), It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
14
Highlighted Features:
  • 【2 Pcs Build Plates for Tina 2】The size of build plate is 110X120mm. Suitable for Tina 2 3D printer. The smooth and flat surface is flexible and removable, easy to remove prints.
  • 【Strong Adhesion】The adsorption force of the 2 pack build plates is strong, so that the prints can be sticked on the surface firmly. After printing, bend the flexible plate, the prints can be removed easily.
  • 【Flexible Removable Magnetic Bed】Separation type bending to take off the model. Do not need the removal tools and scraper to assist the model. Print without warped edge. No glue is needed.
  • User notes: Please do not remove the yellow sticker when printing, which will protect the printing platform from damage. (yellow sticker can be replaced)
16
Highlighted Features:
  • 【No Edge Curling】Creality upgraded 3D printer glass bed provides stronger adhesion. As the hotbed heats to higher temperatures, it provides even more adhesion. Molds will be sticked on the bed firmly without glue, avoiding the issue of print edges curling.
  • 【Excellent Flatness】Creality ender 3 build plate provides flatter and smoother build surface than magnetic mat or sticker, ensuring high flatness for the bottom of model during 3D printing. You would get a totally flat prints and your prints are coming out with that super shiny and smooth texture
  • 【Upgraded Flawless Printing】Creality ender 3 glass bed upgraded has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.
  • 【Super Convenient】Very easy to take off the models. Once the hotbed cools back to room temperature, the prints pop right off without the need for a scraper or anything else, you will get your perfect prints. 3D printing glass bed could be fixed with middle size clips and cleaned with a small amount of water at room temperature.
  • 【High Grade Material】Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃. Applicable with 3D printers such as Ender-3, Ender-3 V2, Ender-3 Pro, Ender-3 S1, Ender-3 S1 Pro, Ender-3S, Ender-3X, Ender-3 KR; Ender-5, Ender-5 Pro, Ender-5S; CR-20, CR-20 Pro, CP-01 and other printers with 220*220mm print bed.
17
Highlighted Features:
  • 【EDGE-FREE CURLING】 - 3D printers coat glass beds so molds stick firmly to the bed without glue, avoiding printing edge curling problems. A necessary 3D printer upgrade component.
  • 【NON-INDENTATION PRINTING】-- upgraded glass plate is much smaller than that of the old version, avoiding the mark indentation on the mold surface during 3D printing.
  • 【EXCELLENT FLATNESS 】- Improved 3D printer glass plates provide a flatter and smoother construction surface than magnetic pads or PEI stickers, ensuring a high flatness at the bottom of the model.
  • 【SUPER CONVENIENT 】- very easy to remove models, no tools required. The borosilicate glass bed can be secured with medium sized clamps and cleaned at room temperature with alcohol or acetone.
  • 【COMPATIBILITY 】- It is suitable for CREASEE brand printers (CS30 / skywalker..) and most other printers on the market with a printing space of 300X300X400. Please confirm whether it is suitable for your printer according to the size of the glass platform
  • Compatible with ABS, PLA, HIPS and other filaments.
  • Monolithic designs install faster and have fewer bubbles than tape or film.
  • The durable construction allows multiple uses of the same or different filament materials.

Last update on 2022-10-06 / Affiliate links / Images from Amazon Product Advertising API

So, these are all of the top-rated 3d printer build plate currently available on the market. We recommend reading all the features of each of the above-mentioned 3d printer build plate before making a purchase decision. This will help you identify the right product for your requirement.

If you like the above listing, you may also like our reviews of the top 3d printer cooling fan.

Guide for Choosing the Best 3D Printer Build Plate

If you are ever in the market for buying 3d printer build plate, you probably know how difficult it is to find the best one for the money. You may get confused thinking about:

  1. Who makes the best quality 3d printer build plate in the industry?
  2. Which one is the best 3d printer build plate for the money?
  3. How to choose the right 3d printer build plate on the market?

When it comes to choosing the right 3d printer build plate among a wide variety of options, you should consider some factors. Those factors may include quality, performance, features, value, etc. Without considering those factors you may end up buying a poor quality 3d printer build plate that will not provide you with the best value for your money.

Before investing in 3d printer build plate, you should find the answer to the following questions:

  • Do you really need to buy 3d printer build plate?
  • How much value you are expecting from the 3d printer build plate?
  • What factors do you believe should be considered when buying 3d printer build plate?

Don’t forget to check our listing of the best 3d printer enclosure.

To help you make an informed decision, here we are going to discuss the factors that you should consider when shopping for 3d printer build plate whether online or from any retail store.

Product Quality

Product quality should be the most important factor to consider when shopping for 3d printer build plate. You are going to use this product for a long time. So, you should consider the quality of the 3d printer build plate and make sure it will fit your requirement.

Features

The 3d printer build plate comes with a lot of features and functionalities. In this article, we’ve mentioned the features of each of these 3d printer build plate so that you can choose the right one for your needs. You should read all the features of the 3d printer build plate before making a decision.

Read Our Recommendations for The Best Printers for Leaflets.

Price

You can get an array of 3d printer build plate, from the cheapest to the most expensive. The 3d printer build plate that costs more is usually made from better materials and will last longer than a cheaper one. But if you want to be able to purchase a new 3d printer build plate every few months, you may want to consider the budget-friendly options.

Reviews and Ratings

Finally, the customer reviews and ratings should be considered when buying 3d printer build plate. Good customer reviews and ratings indicate that the 3d printer build plate is going to perform well whereas bad ratings and negative reviews indicate that people already have faced problems using that particular product. Read our reviews of 3d printer extruder.

Final Verdict

We hope you enjoyed our listing of the best 3d printer build plate. As you can see, there are still so many alternatives to choose from. So, it’s better to check out each of these items carefully and pick the right 3d printer build plate that сan satisfies all your requirements.

Leave a Comment