Top 17 Best Board for 3D Printers in 2022

Finding the right board for 3d printer has become a challenging task because there are so many choices out there. This is why we’ve compiled a list of the best board for 3d printers so that you can compare them and choose the right one for your needs.

All the board for 3d printers featured on this page are independently chosen. When you make any purchase through links on this site, we may earn a small affiliate commission at no extra cost to you.

Followings are the best-selling board for 3d printers on Amazon:

Last update on 2022-12-04 / Affiliate links / Images from Amazon Product Advertising API

While checking out the board for 3d printers, you may also be interested in our collection of the best borderless printers.

Best Board for 3D Printers

In the following section, we’ve compiled the most popular board for 3d printers available today. To make your choice easier, we’ve listed some of the key features of each of these board for 3d printers.

Highlighted Features:
  • 【Super Quiet】The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
  • 【Widely Application】Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 5,Ender 5 Pro 3D printer. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website.
  • 【Driver】TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled.
  • 【Update Firmware Method】Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
  • 【After Sale Service】Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours.
Highlighted Features:
  • 【Main Control Chip】Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6;
  • 【Three CNC Fan】Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;
  • 【Increased Heat Sink】Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance;
  • 【USB Micro B】The PC communication USB interface is upgraded from Mini USB to Micro USB B, which is more adaptable;
  • 【Output Power Supply】Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
Highlighted Features:
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Highlighted Features:
  • 🌟【High Compatibility】SKR MINI E3 V3.0 Control board compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.
  • 🌟【Multiple Functions】It Supports BLTouch, RGB lights, blocking detection, shutdown function. What ’s more, it also supports TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.
  • 🌟【Superior Heat Dissipation Performance】New Upgraded SKR MINI E3 V3.0 main board is equipped with a large Aluminum heat sink of stepper motor driver instead of pieces small heat sink, this design is able to increase the heat dissipation performance of the motherboard by 20% which greatly strengthen the heat dissipation capacity of the driver totally.
  • 🌟【Firmware Update】Compatible with Marlin and Klipper firmware. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard,copy and save it to SD card , firmware must bed reserved, then re-plug the SD card and wait to 10s. The n firmware has been successfully updated. Note: Our control board come without SD card.
  • 🌟【TMC2209 Drivers】SKR MINI E3 V3.0 mainboard adopts ultra silent TMC2209 stepper motor driver, it generates lower heat and it has a large-area cooling position to lower the temperature when driver working. Meanwhile, it adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque.
Highlighted Features:
  • 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
  • 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
  • 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing.
  • 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer.
  • 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port.
Highlighted Features:
  • 🔥About MCU, If you received the main control chip about STM32F429VGT6: Before DIY firmware modification, customers need to build an F429 environment on the compilation platform for compilation and use, instead of directly using the previous F407 firmware. For more details, please refer to the tutorial on Github or you can write to us.
  • 🔥Includes a protection circuit on thermistor inputs which protects against short circuits between the heater cartridge and the bed heating element. This is a common mistake made by many users when replacing a nozzle or working on the hotend so we expect this feature to be a welcome one;
  • 🔥The TMC2209 stepper driver is not easy to lose steps and is in an ultra-quiet mode; the module has a large area of heat dissipation pad, which can reduce the temperature of the driver when it is working; the module supports three modes: STEP / DIR and UART.
  • 🔥TMC Motor drivers can be used in SPI or UART mode by simply adjusting the onboard jumpers beneath each motor driver. Additionally you can connect or disconnect the TMC DIAG pin using an onboard jumper allowing you to use hard endstops or sensorless homing without the need to cut any pins.
  • 🔥Includes an additional heater protection circuit which protects against runaway heating on the bed and hotend heaters. By default, the heaters are off so if the MCU or MOSFETs are damaged, the heaters will shut down instead of enter into thermal runaway;
Highlighted Features:
  • ⭐【MCU & EEPROM 】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 improving previous revisions, in addition to including a 4KB 24C32 on-board EEPROM. Supports running Klipper & Marlin.
  • ⭐【Versatile Motherboard】Thanks to onboard heating covering TMC2209 stepper drivers with UART mode, BIGTREETECH SKR MINI E3 V3.0 32-bit control board offers a much quieter printing environment. Featured with belt-driven Z-axis with dual motors, BTT SKR mini E3 V3.0 supports upgrades like various LED displays, filament runout, or easy BLTOUCH installation.
  • ⭐【Upgraded Heat Dissipation 】 Featured with upgraded heatsink, SKR MINI E3 V3.0 offers you with excellent style, and effectively enhances on the heat dissipation. Comes in 3 PWM controlled fans, which makes for ideal cooling performances. Thermister protection on the motherboard effectively prevents shortcircuit.
  • ⭐【Micro USB-B interface 】Compared with the skr mini e3 v2.0, the PC communication USB interface of SKR MINI E3 V3.0 control board is changed from Mini USB to Micro USB-B, which is more adaptable.
  • ⭐【100% Satisfying Customer Services 】Due to Amazon's return policy, there may be some problems with the packaging of the products you receive, we are sorry for this situation, please don't worry, feel free to contact us, we will solve this problem for you properly!
Highlighted Features:
  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
  • 【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install
  • 【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable quality, long service life, and can be reused more than 100,000 times.
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit motherboard.(3d printer accessory with the best experience)
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed
Highlighted Features:
  • 💝【Brand-new Version for Voron V0& V0.1】Featured with Raspberry Pi ARM Cortex- Mo+ MCU PR2040, Bigtreetech SKR Pico V1.0 upgraded on ID design, which coexists of stylish appearance and excellent performances, ideal choice for Voron players.The fuse kit consists of fuse and holder,which enables easy disassembling and installation. Type-C interface allows for main control communication.
  • 💝【Perfectly match With Raspberry Pi】With Raspberry Pi board frame, Raspberry Pi can be perfectly installed on BTT SKR Pico V1.0, saving internal spaces. The unique lateral design of SKR Pico‘s seat perfectly matches the space characteristics of the Voron V0 and V0.1 machine that needs to be fixed to the motherboard longitudinally.
  • 💝【Mute Printing & Premium Capacitors】Featured with TMC2209 mute driver UART mode, SKR PICO V1.0 supports mute 3D printing. The main version of the chip capacitor (MLCC) adopts high-quality Murata capacitors to enhance product's quality.
  • 💝【Upgraded Heat Dissipation】Upgrade the design of the heat sink and increase the heat dissipation area. Increased controllable fan enables to lower the temperature of the whole machine when the it's working, effectively solving problems related to heat dissipation, and improving on the heat dissipation.
  • 💝【Satisfying After-Sales Supports】Any issues or questions about BTT SKR Pico V1.0, please feel free to contact us any time on Amazon. Our professional technical team're willing to provide you with immediate technical supports as soon as we can.
Highlighted Features:
  • Compatible: This Touch Screen kit fits for Creality Ender3 v2/Ender3/Ender3 Pro 3D printer. Notice:Just match with these three printers with 32 bit,4.2.2/4.2.7 motherboard.
  • Excellent Screen display: 4.3 inch full-color screen,24 bit color HD screen displays and clear views in good contrast with intellegence and mass memory.
  • Firmware: Simply download the touch screen Kit firmware from the Creality Official Website and save the file to your printer’s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.
  • Easy to Use: Touch the interface then complete the instruction.
  • Installation Instruction: Connect the screen wires, use the hexagon wrench to lock the screw on the right of the screen with the printer base.
Highlighted Features:
  • Creality new release silent motherboard V4.2.2, 32bit,compatible with Ender 3 V2
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.
  • Firmware comes pre-installed, pre-configured for the Ender 3 v2, makes it totally plug & play.
  • This silent mainboard preinstalls the Ender 3 V2 firmware. If you want to install it in your Ender 3 /Ender3 Pro/ Ender-5, need to flash the Ender 3 /Ender 3 Pro/Ender-5 firmware.
  • Suitable for Ender 3, Silent function Customized and Non-standard matching
  • The TMC2225 driver is super quiet.Main control chip is STM32F103RET6
  • Thermal runaway protection is enabled. This mute mother board is optimized by circuit, effectively solve the heating problem.
  • Support 24V input voltage.With USB Port,can be Worked with E/Z/Y/X Axis Motor.
Highlighted Features:
  • Super Quiet. Compatible with Creality Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 v2. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from Official website.
  • Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.
  • Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
  • Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you as soon as we can.
Highlighted Features:
  • Support Marlin2.X firmware,32-bit 168MHz MCU STM32F407VGT6
  • Support TF Card,USB Disk,Virtural USB Device,PWM TTL,Power TVS Protect
  • 3.5 inches Touch screen Support 3 types of UI
  • With TS35 Touch screen,Robin WIFI and 5pcs MKS TMC2209
Highlighted Features:
  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly.
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem.
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen.
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive.
  • ❤️We will provide a long-term warranty service of up to 12months,Strict testing for all components before delivery. If you encounter any problems when printing, please feel free to contact us, please give us a chance to solve the problem for you.
Highlighted Features:
  • ☆【48V High Speed Printing】Motor voltage of SKR 3 EZ varies from 12V to 48V (need to use EZ5160 Pro driver for 48V) while SKR 3 varies from DC 12V to 24V. Higher voltage can extremely improve your printing speed and you can adjust it with a jumper cap. What's more, SKR 3 owns 2 normal fans, and the EZ version owns 3 normal fans, which can ensure the smooth operation of your printer and advance your printing quality.
  • ☆【Safe Anti-misplugging Design】Wrong installation of drivers will not only cause damage to the drivers itself but even ruin the motherboard or catch fire. And according to our survey, 40% Users may misplug the drivers unintentionally. Our new arrivals SKR 3 EZ motherboard and EZ series drivers, featuring an unprecedented anti-misplugging design, can totally remove such hidden dangers to offer you a better and safer printing experience! (Traditional TMC drivers is still compatible.)
  • ☆【Updates of Processor】The new processor of SKR 3 EZ controller is upgraded to 32-bit 480MHz ARM Cortex-M7 series STM32H743VI, with which the running speed and printing accuracy of SKR 3 controller is greatly increased by 30%+ while its working noise become lower. Its upgraded thermistor supports PT1000, exempting the need of external module.
  • ☆【DIY Friendly Interfaces】BOOT0 is added for programming firmware in DFU mode. WIFI module (ESP-12S, ESP-07S, ESP32) is reserved. SKR 3 EZ motherboard also supports bltouch, resume printing function, RGB lights, blocking detection and shutdown after printing function. What’s more, it’s also compatible with TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0/12864 LCD display as well as EZ2209/EZ2208/EZ5160, TMC2209/TMC2208/ TMC5150/DRV8825 stepper motor drivers.
  • ☆【About Firmware】SKR 3 EZ silent board compatible with three firmware Marlin, Klipper and RepRap, which are widely used in the 3D printing world. Firstly download firmware on GitHub website of name “firmware.bin”, copy and save it to SD card, firmware must bed reserved, then re-plug the SD card and wait to 10s. When the status indicator stops flashing and the file name in the SD card is renamed to “FIRMWARE.CUR” then update successfully. Note: Our control board come without SD card.
Highlighted Features:
  • Support Voron Printers.
  • Integrated 4KB EEPROM, TypeC online serial port.
  • Support LCD screen to read U disk
  • TVS power spike processing to protect the back-end circuit.
  • We have use videos and user manual, please contact us to get them if needed.
Highlighted Features:
  • This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. Please note: With a SD Card base on back,SD card not included.
  • You can easy connect it to your Ramps board using the "smart adapter" included.After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card.
  • All actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller.
  • Print your 3D designs without PC, just with a g-code design stored on the SD card.
  • LCD 12864 graphic smart display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking.

Last update on 2022-12-04 / Affiliate links / Images from Amazon Product Advertising API

So, these are all of the top-rated board for 3d printers currently available on the market. We recommend reading all the features of each of the above-mentioned board for 3d printers before making a purchase decision. This will help you identify the right product for your requirement.

If you like the above listing, you may also like our reviews of the top brother all in one color laser printers.

Guide for Choosing the Best Board For 3D Printer

If you are ever in the market for buying board for 3d printer, you probably know how difficult it is to find the best one for the money. You may get confused thinking about:

  1. Who makes the best quality board for 3d printer in the industry?
  2. Which one is the best board for 3d printer for the money?
  3. How to choose the right board for 3d printer on the market?

When it comes to choosing the right board for 3d printer among a wide variety of options, you should consider some factors. Those factors may include quality, performance, features, value, etc. Without considering those factors you may end up buying a poor quality board for 3d printer that will not provide you with the best value for your money.

Before investing in board for 3d printer, you should find the answer to the following questions:

  • Do you really need to buy board for 3d printer?
  • How much value you are expecting from the board for 3d printer?
  • What factors do you believe should be considered when buying board for 3d printer?

Don’t forget to check our listing of the best brother all in one inkjet printers.

To help you make an informed decision, here we are going to discuss the factors that you should consider when shopping for board for 3d printer whether online or from any retail store.

Product Quality

Product quality should be the most important factor to consider when shopping for board for 3d printer. You are going to use this product for a long time. So, you should consider the quality of the board for 3d printer and make sure it will fit your requirement.


The board for 3d printer comes with a lot of features and functionalities. In this article, we’ve mentioned the features of each of these board for 3d printers so that you can choose the right one for your needs. You should read all the features of the board for 3d printer before making a decision.

Read Our Recommendations for The Best Wide format All In One Printers.


You can get an array of board for 3d printers, from the cheapest to the most expensive. The board for 3d printer that costs more is usually made from better materials and will last longer than a cheaper one. But if you want to be able to purchase a new board for 3d printer every few months, you may want to consider the budget-friendly options.

Reviews and Ratings

Finally, the customer reviews and ratings should be considered when buying board for 3d printer. Good customer reviews and ratings indicate that the board for 3d printer is going to perform well whereas bad ratings and negative reviews indicate that people already have faced problems using that particular product. Read our reviews of brother all in one laser printers.

Final Verdict

We hope you enjoyed our listing of the best board for 3d printers. As you can see, there are still so many alternatives to choose from. So, it’s better to check out each of these items carefully and pick the right board for 3d printer that сan satisfies all your requirements.

Leave a Comment